Silicone Repair Kit by Irontech

Sex Doll Accessories – Doll-Care Kit Guide for Silicone Products

Proper maintenance is essential to preserve the realism, appearance, and longevity of silicone sex dolls. This Silicone Doll Care Kit Guide provides step by step instructions for repairing minor damage, reattaching nails, correcting gel breast or buttock deformation, removing stains, and performing safe cleaning procedures.

The kit includes specialized tools such as silicone repair glue, nail glue, AB gel, stain remover, cleaning oil, syringes, cotton swabs, and cleaning cloths, allowing users to address common wear issues at home with confidence. When used correctly, these accessories help restore surface integrity, maintain realism, and protect your investment.

Included Products & Instructions

Repair Glue – Silicone (30ml)

Used to repair small cuts, cracks, or surface damage on silicone products.

Instructions:

1. Thoroughly clean the damaged area, ensuring it is free of dust, oil, and debris.

2. Use a suitable tool or cotton swab to apply a small amount of glue directly to the damaged area.

3. Gently wipe away excess glue from the surface without disturbing the applied layer.

4. Allow the area to rest for 6–8 hours, then inspect to confirm the repair is complete.

Nail Glue – For Silicone (10ml)

Designed specifically for reattaching fingernails or toenails on silicone dolls.

Instructions:

1. Clean and dry the area where the nail will be applied.

2. Remove the cap from the nail glue.

3. Apply a moderate amount of glue to the nail application area.

4. Attach the nail and press gently for 30 seconds.

Important Note:
Avoid excessive pressure on the nail or fingers. Excess tension between the nail and silicone may cause future detachment.

5. Check that the nail is firmly adhered before use.

AB Gel – For Gel Breast or Buttock Deformation (100ml)

Used to correct deformation or volume loss in gel filled breasts or buttocks.

Preparation:

• Empty cup

• Cleaning oil

• Syringe set

Safety Note:
The needle is extremely sharp. Handle with care to avoid injury.

Instructions:

1. Pinch the nipple gently and slowly insert the needle deep into the nipple.

2. After insertion, carefully separate the gel from the skin using the needle to create a cavity.

3. Repeat the process on the other breast if needed.

4. Securely connect the syringe needle to the tube to prevent detachment.

5. Mix Gel A and Gel B in a 1:1 ratio thoroughly in the cup.

Important Note:
Once mixed, the gel must be injected promptly, as it solidifies quickly.

6. Fill the syringe with the mixed gel, connect it to the needle, and begin injecting while holding the connection firmly.

7. Adjust needle position during injection to ensure even gel distribution.

8. Remove the needle and clean all syringe components with cleaning oil immediately to prevent clogging.

Stain Remover (15g)

Used to reduce or remove stains caused by dark clothing, dyes, or surface transfer.

Instructions:

1. Clean the stained area thoroughly with cleaning oil.

2. Apply the stain remover evenly over the affected area.

3. Let it sit for 8 hours.

4. Clean the surface again with cleaning oil.

Note:
Results may vary depending on the stain type. Multiple applications may be required.

Cleaning Oil (100ml)

A multi-purpose cleaning solution for routine maintenance.

• Can be applied directly to stains for wiping

• Can be used with a cleaning cloth soaked in cleaning oil

Note:
Keep the bottle tightly sealed to prevent evaporation.

Additional Accessories Included

• Syringe Set

• Cotton Swabs

• Cleaning Cloth

• Doll-Care Kit Instruction Guide

Safety & Usage Recommendations

• Always clean and dry areas before applying any product

• Use moderate pressure when repairing or attaching components

• Follow curing and resting times carefully

• Store all products in a cool, dry place away from direct sunlight

• Keep tools and chemicals out of reach of children

Silicone Sex Doll Repair Kit Manual